Home

Products

Services

Payment

News

Contact

  
       Slide Bar Quick Release

This item was originally designed as an integral part of a Kayak Back Brace. (See sketch below)  It is used in conjunction with our 3BHD10  1" 3 Bar Adjusting Slide. In this particular case, two slides are used for adjusting and the third is the end piece which slips through the quick release.

 

These are Fittings that go into each end of a curved aluminum tube which is collectively known as a Camberspar®. This allows a Jib to be self-vanging and self tacking. This assembly was made for the sail maker who holds the patent.

These are Fittings that go into each end of a curved aluminum tube which is collectively know as a Camberspar®. This allows a Jib to be self-vanging and self tacking. This assembly was made for the sailmaker who holds the patent. 

These clips were added to 12" D rings that were subsequently Black-Oxide coated prior to being attached to a type of Military Backpack.

This strap was added to a 1" D ring for attachment - 3/8" Hole

These removable hinges were attached to the gunnels of boats for flip-up seats.

Although hard to see, the inset shows a RR6230WB Ring with crossbar used as a tack ring on this maxi-boat

                                         Know What You Want?  Jump To The Head Of The Line

                                   D Rings   Round Rings   Triangle Rings   Adjusting Slides   Footman Loops   Loops

 

[ Home ] [ Up ]

Send mail to info@coletech.net with questions or comments about this web site.
Last modified: April 06, 2006